IP-DECT access point

Ascom IP-DECT access point has compact design, an integrated antenna, connects to IP-PBX via LAN and supports Power over Ethernet (PoE) for ease of installation. Therefore it requires no additional cabling to support telephony.

All wireless transmissions are encrypted and support cipher re-keying during calls to safeguard against radio eavesdropping. It features multiple channels with capacity for up to eight simultaneous voice calls, messaging; plus a dedicated alarm channel. Its built-in antenna has exceptional radio coverage, and there is even provision to connect external antennae to improve coverage or extend range.

IP-DECT Access Point technical specification

Features

Direct connection to IP-PBX via LAN
Enhanced DECT Security (ETSI TS 102 841, GAP.N.35)
DECT GAP/CAP radio interface
Roaming and handover
8 simultaneous voice calls
Messaging, Alarm and Interactive Messaging
Broadcast and Multicast Messaging
H.323 or SIP protocol over IP
Secure SIP over TLS and SRTP
Over the air synchronization
Web interface for configuration and software upgrade
Power over Ethernet (PoE) or local power supply
External LED status indication

Physical

Size (h× w × d): 170 × 170 × 38 mm (incl. mounting bracket)
Weight: Approx. 400 g
Colors: White (NCS S 0502-B)
External connectors: 2 × MCX connectors for external antennas

Environmental

Operating temperature: -10°C to +55°C
Storage temperature: -25°C to +70°C

DECT frequencies

1880-1900 MHz (Europe, Africa, Middle East, Australia, New Zealand and parts of Asia)
1900-1906 MHz (Thailand)
1910-1930 MHz (South America)
1920-1930 MHz (North America)